Welding Training

WELDING TRAINING

TABLE OF CONTENTS


 

1.0 Running A Bead And Building A Pad on Mild Steel Plate – Flat Position - SMAW

  • Strike and Restart an Arc, and Crater and Backfill at the Edge While Running a Bead on Mild Steel Plate 
  • Build a Pad on Mild Steel Plate in the Flat Position with E6010
  • Build a Pad on Mild Steel Plate in the Flat Position with E7018 

2.0 Fillet Weld Lap Joint With E6010 and E7018 and Multi-Pass Tee Joint with E6010 – Flat Position - SMAW

  • Weld to Specifications a Fillet Weld Lap Joint in the Flat Position with E6010
  • Weld to Specifications a Fillet Weld Multi-Pass Tee Joint in the Flat Position with E6010 
  • Weld to Specifications a Fillet Weld Lap Joint in the Flat Position with E7018 

3.0 Fillet Weld Multi-Pass Tee Joint with E7018 and E7024 and Lap Joint – Flat Position - SMAW 

  • Weld to Specifications a Fillet Weld Multi-Pass Tee in the Flat Position with E7018
  • Weld to Specifications a Fillet Weld Lap Joint in the Flat Position with E7024 
  • Weld to Specifications a Fillet Weld Multi-Pass Tee Joint in the Flat Position with E7024 

4.0 Fillet Weld Multi-Pass Tee Joint and Lap Joint with E6010, E7018, E7024—Horizontal Position - SMAW 

  • Weld to Specifications a Fillet Weld Lap Joint in the Horizontal Position with E6010  
  • Weld to Specifications a Fillet Weld Multi-Pass Tee Joint in the Horizontal Position with E6010 
  • Weld to Specifications a Fillet Weld Lap Joint in the Horizontal Position with E7018
  • Weld to Specifications a Fillet Weld Multi-Pass Tee Joint in the Horizontal positon with E7018
  • Weld to Specifications a Fillet Weld Lap Joint in the Horizontal Position with E7024
  • Weld to Specifications a Fillet Weld Multi-Pass Tee Joint in the Horizontal Position with E7024 

5.0 Fillet Weld Multi-Pass Tee Joint and Lap Joint with E6010 and E7018—Vertical Position - SMAW 

  • Weld to Specifications a Fillet Weld Lap Joint in the Vertical Position with E6010 
  • Weld to Specifications a Fillet Weld Multi-Pass Tee Joint in the Vertical Position with E6010 
  • Weld to Specifications a Fillet Weld Lap Joint in the Vertical Position with E7018 
  • Weld to Specifications a Fillet Weld Multi-Pass Tee Joint in the Vertical Position with E7018

6.0 Fillet Weld Multi-Pass Tee Joint and Lap Joint with E6010 and     E7018—Overhead Position - SMAW 

  • Weld to Specifications a Fillet Weld Lap Joint in the Overhead Position with E6010 
  • Weld to Specifications a Fillet Weld Multi-pass Tee Joint in the Overhead Position with E6010 
  • Weld to Specifications a Fillet Weld Lap Joint in the Overhead Position with E7018 
  • Weld to Specifications a Fillet Weld Multi-Pass Joint  in the Overhead Position with E7018 

7.0 Set Up Equipment for Oxyacetylene Cutting, Proper Use of Cutting Torch, Make and Restart 90o Cuts, Make a Flame Beveled Cut and   Cut a Hole in Mild Steel - OFC 

  • Set Up Equipment for Oxyacetylene Cutting 
  • Turn On, Light, and Adjust a Cutting Torch to a Neutral Flame and Turn Off Cutting Equipment
  • Make a 90o Cuts on Mild Steel and Restart a Cut 
  • Make a Flame Beveled Cut on Mild Steel Plate 
  • Cut a Hole in Mild Steel 
  • Lay Out Pattern on Mild Steel Plate and Cut Pattern to Specifications 

8.0 Preparation for Welding  - GTAW

  • Set Up A Flow Meter Regulator for GTAW Shielding Gases 
  • Set Up and Shut Down GTAW Equipment for Welding Mild and Stainless Steel 
  • Prepare Mild and Stainless Steel for GTAW and Stainless Steel 

9.0 Stringer Beads with and without Filler Metal - GTAW

  • Prepare A Tungsten Electrode for Welding Mild or Stainless Steel 
  • Strike and Maintain an Arc to Make Stringer Beads on Mild or Stainless Steel without Filler Metal in the Flat Position
  • Strike and Maintain an Arc to Make Stringer Beads on Mild or Stainless Steel with Filler Metal in the Flat Position

10.0 Fillet Weld Lap Joint and Fillet Weld Tee Joint on Mild or Stainless Steel – Flat Position - GTAW 

  • Weld to Specifications a Fillet Weld Lap Joint on Mild or Stainless Steel in the Flat Position 
  • Weld to Specifications a Fillet Weld Tee Joint on Mild or Stainless Steel in the Flat Position 
  • Weld to Specifications an Open-Root Square-Groove Butt Joint on Mild or Stainless Steel in the Flat Position 
  • Weld to Specifications an Open-Root Corner Joint on Mild or Stainless Steel in the Flat Position 

11.0 Fillet Weld Lap Joint and Fillet Weld Tee Joint on Mild or Stainless Steel – Horizontal Position - GTAW 

  • Weld to Specifications a Fillet Weld Lap Joint on Mild or Stainless Steel in the Horizontal Position 
  • Weld to Specifications a Fillet Weld Tee Joint on Mild or Stainless Steel in the Horizontal Position 

12.0 Open-Root Square Groove Butt Joint and Open-Root Corner Joint on Mild or Stainless Steel – Horizontal Position - GTAW 

  • Weld to Specifications an Open-Root Square-Groove Butt Joint on Mild or Stainless Steel in the Horizontal Position 
  • Weld to Specifications a Open-Root Square-Groove Corner Joint on Mild or Stainless Steel in the Horizontal Position 

13.0 Fillet Weld Lap Joint and Fillet Weld Tee Joint on Mild or Stainless Steel – Vertical Position - GTAW

  • Weld to Specifications a Fillet Weld Lap Joint on Mild or Stainless Steel in the Vertical Position 
  • Weld to Specifications a Fillet Weld Tee Joint on Mild or Stainless Steel in the Vertical Position

14.0 Open-Root Square Groove Butt Joint and Open-Root Corner Joint on Mild or Stainless Steel – Vertical Position - GTAW  

  • Weld to Specifications an Open-Root Square-Groove Butt Joint on Mild or Stainless Steel in the Vertical Position 
  • Weld to Specifications a Open-Root Square-Groove Corner Joint on Mild or Stainless Steel in the Vertical Position 

15.0 Set Up Equipment for Plasma Arc Cutting, Proper Use of Plasma Torch, Make and Restart 90o Cuts, Make Beveled Cuts, and Cut Holes in Mild Steel and Stainless Steel Plate - PAC

  • Set Up Equipment for Plasma Arc Cutting, Turn On, Adjust Cutting Torch and Turn Off Cutting Equipment 
  • Make a 90o Cuts on Mild and Stainless Steel and Restart a Cut 
  • Make Beveled Cuts on Mild and Stainless Steel Plate 
  • Cut Holes in Mild and Stainless Steel Plate

16.0 Review and Assessment 

  • Review/Completions – Sessions  1 -15  
  • Final Examination